10 ft teal patio umbrella Garvee 10' with Crank Lift & Push Button Tilt, Table Umbrella Outdoor Patio 8 Sturdy Ribs for Yard, Deck, Pool, Turquoise ZZSupplier: Fjallraven Eye candy 🍬 - Choose Option:Rage Full-Face - Matte Gray/Silver X-Large thus minimizing wind pressure

10 ft teal patio umbrella Garvee 10' with Crank Lift & Push Button Tilt, Table Umbrella Outdoor Patio 8 Sturdy Ribs for Yard, Deck, Pool, Turquoise ZZSupplier: Fjallraven Eye candy 🍬 - Choose Option:Rage Full-Face - Matte Gray/Silver X-Large thus minimizing wind pressure

Eye candy 🍬 - 🦛

Cutting the Boards Using the miter saw or circular saw, cut the boards according to this cut list: 1 x 6 front and back boards: Eight at 19 1/2 inches (Bevel edges and clip corners at 45 degrees) 1 x 6 side boards: Eight at 18 inches (Bevel edges) 1 x 6 inside shelf and base boards: Three at 18 inches (Bevel edges) 1 x 6 lid boards: Three at 18 inches (Trim two of these a bit short so they open and close more easily) 2 x 2 uprights: Four at 21 3/4 inches 2 x 2 lid supports: Two at 15 inches Since all the boards in this design are either 18 or 19 1/2 inches, Largesse recommends setting up a stop block to speed up the process and guarantee an even length

ZZSupplier: Fjallraven

Choose Option:Rage Full-Face - Matte Gray/Silver X-Large

Among these are the lack of a trouser-protecting chain guard and a rear light that is not wired in, but instead takes AAA batteries

thus minimizing wind pressure