RFID Tag - ABS Token MIFARE Classic 1K (13.56 MHz) $50 - $100 or 140°  Lighting Configuration:

or 140°   Lighting Configuration: Flood Pattern   Power Efficiency: >95%   Power Factor: 0

pre-measured cartridge and screw-on nozzle for accurate distribution

On the output side of the output side of the charge controller is a 60-amp hydraulic-magnetic circuit breaker

These units are constructed of 50 feet of 14/3 SOOW explosion proof cord and are rated at 15 amps of continuous service

The fixtures are supported by a cube frame with skid pockets

RFID Tag - ABS Token MIFARE Classic 1K (13.56 MHz) $50 - $100 or 140°  Lighting Configuration:This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below. This tag has a diameter of 30mm with a 5mm hole in the center and an overall thickness of 2. 25mm. It works with MIFARE 13. 56 MHz compatible readers. The MIFARE Classic