Seakeeper Ride Zinc Anode Kit [12833SP] Brand_Boat Leveler Co. 12" x 13" x 15"

12" x 13" x 15"

Output Current at Nominal Output Voltage and 40 Degrees C: 16 A

An optional battery temperature sensor manages battery charging based on battery temperature

Single Rig

Integrated MOB/PLB alerting and tracking system

Seakeeper Ride Zinc Anode Kit [12833SP] Brand_Boat Leveler Co. 12" x 13" x 15"Zinc Anode Kit The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down. Installation Remove the blade by unscrewing the four (4) M8 1. 25 x 20mm screws and their washers. Unscrew the two (2) M4 0. 7 x 12 mm bolts holding the zinc sacrificial anode. Attach the new zinc sacrificial anode using the two (2) M4 0. 7 x 12mm bolts and tighten to 20