Flush Cutters - Xcelite $100 - $250 Ten feet of 16/3 SOOWÂ

Ten feet of 16/3 SOOW cord coming out of the inline transformer

Slow mode is used to pinpoint accuracy at distance and is approximately 35 seconds for full rotation and 20 seconds for one full range tilt

The HALP-EMG-48-2L-2XH-T8 hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety

28 amps Amp Draw @ 12V DC 9 amps 5

wet locations and paint spray booths

Flush Cutters - Xcelite $100 - $250 Ten feet of 16/3 SOOWÂThese are simple flush cutters from Excelite that give you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good, but if you really need to get up close and personal, flush cutters are the way to go! Each pair of these cutters has a 3 4in jaw length and are 5in in overall length. This tool flush cuts soft wire up to 20 AWG (0. 8mm) and is ESD safe. **Note:** To make sure that these flush cutters ship safely, there