MS-1v2/ MS-1.5v2/ MS-2v2 Miter Squares Size:MS-2v2 and a myriad of other

and a myriad of other uses

The sliding tables are made from anodized aluminium

It is ground to 43 degrees with a 5 Degree micro-bevel on one end and the other end is a gap-toothed scrub iron ground to 25 Degrees with a 5 Degree micro-bevel

It is primarily used as a static way to set the height of circular saw blades

The 2mm hex wrench is conveniently stored in the body of the DJ-3 and is retained by a hidden rare earth magnet

MS-1v2/ MS-1.5v2/ MS-2v2 Miter Squares Size:MS-2v2 and a myriad of otherOf all the different wood joints you will make, one of the most difficult is one of the simplestthe miter joint. Lets say you are making a frame and your layout tool is off by 0. 08mm, this little 0. 08mm error multiplied by the eight cuts means that fourth corner now features an ugly 0. 3mm gap which is just under 1 32 of an inch, directly influencing the tightness of the joint and the appearance. Therefore, you need a precision miter square for