1/4 BSPP Double Acting Pilot Check Valve meta-100mm-rear-entry Industry standard design in both

Industry standard design in both 63mm gauges and 100mm gauges with standard ¼ BSP thread mounting on the 63mm gauge and ½” BSP tread mounting on the 100mm gauge

Data Sheet 1

Installation is really simple and will be illustrated in a separate document

It is rated for a working pressure of 350 bar and uses a pilot ratio of 1 : 3

Central Unit – The receiver with all cabling pre-installed (AMP)

1/4 BSPP Double Acting Pilot Check Valve meta-100mm-rear-entry Industry standard design in bothThe VBD1B is a compact pilotoperated check valve with in BSPP ports. It locks a doubleacting actuator in both directions until pilot pressure is applied, making it suitable for holding loads in place. This model handles flows up to about 20 L min and weighs roughly 0. 65 kg. It uses a high pilot ratio (about 1 : 5. 5) and has a standard cracking pressure around 4. 5 bar, although alternative springs of 3 bar or 6 bar can be ordered. The steelbody