Crosby® 3/4"-10 x 1.64" Swivel Hoist Ring - HR-125 Quik Drive Roofing Tile Screws To continue applying the epoxy

To continue applying the epoxy after more than 10 minutes of stoppage

Allowable loads are based on parlallel-to-grain loading and a minimum member thickness of 3 1/2" with machine bolts in a single shear

Electrical and mechanical fastening to steel

The PTRHA is compatible with Simpson Strong-Tie® powder-actuated tool systems as well as other common tools

professional look while securing boards tightly

Crosby® 3/4"-10 x 1.64" Swivel Hoist Ring - HR-125 Quik Drive Roofing Tile Screws To continue applying the epoxySwivel Hoist Rings are widely used across many rigging and lifting setups. Designed to both pivot and swivel at the base, these hoist rings can freely rotate in sync with the loads movement. While standard eye bolts serve similar lifting purposes, they remain fixed and will lose capacity when subjected to angled loading. As an example, if a gust of wind causes the suspended load to shift during a lift, a swivel hoist ring will turn with the load